$45 H3 Quick n’ Simple Auxiliary Audio Input

Schwarttzy
50 In Stock

The H3 Quick n' Simple Auxiliary Audio Input is back in-stock while supplies last June 11th, 2018! The H3 Quick n’ Simple Auxiliary Audio Input is a plug and play 3.5mm audio input wiring harness for the H3 Hummer factory radio. This wiring harness only minutes to install, works flawlessly, and is easy to use. Once installed, just plug a standard 3.5mm headphone jack in the wiring harness and the other end into your phone. Press the button labeled "Band" on the factory radio until you see "XM". Do not worry, an XM-Sirus satellite subscription isn't necessary for the Quick n' Simple Auxiliary Input. When done listening to the music on the phone, just unplug the 3.5mm headphone jack and XM-Sirus satellite will work normally again.

Continue Reading Add to cart
Schwarttzy
9 In Stock

Lift the rear suspension 1 1/4 inches with these shackles for the H3 Hummer. Extended 2 inches longer than the factory, these shackles help out with maintaining the forward rake after leveling the front-end for better gas mileage and gaining those extra few inches for off-road. These shackles add extra confidence in tight turns because of the strength that these 1/4 inch thick steel and 1/8 inch braced shackles give you over the factory stamped shackles.

Continue Reading Add to cart
Schwarttzy
6 In Stock

The H3 Hummer High Clearance Leaf Spring Mounts completely replace the entire rear axle leaf spring bolt plate. Designed to be used with 2" longer shackles but not required, these mounts eliminate all the issues with the factory leaf spring mount. An increased ground clearance protects from ripped up leaf spring mounts, stops broken U-Bolts, bend shock mounts, and allows for the factory spec shock ride height with the optional longer shackles. The Leaf Spring Mounts are laser cut from 1/4 inch steel and bent with relief cuts out of one solid piece of metal, making it a part that's bolted on and forgotten about.

Continue Reading Add to cart
Schwarttzy
0 In Stock

Slide over rocks and through the mud without getting stuck, with 1/4 inch thick skid plates extending the H3 Hummer Under Body Protection 4' x 2', completely protecting the transmission and transfer case from damage. The skid plates come painted black, and with to brackets for mounting. Huge, flat, and smooth, these skid plates truly shine in the deep mud or snow helping you to easily slide on down the trail, when the 35" tires just can't quite reach the ground.

Continue Reading Add to cart
Schwarttzy
3 In Stock

The H3 Hummer Hidden Winch Mount bolts on to the Hummer with no permanent modification required to mount an 8,000lb. winch. The winch mount is excessively strong, made from 3/8" steel for unquestionable strength and reliability. Secured in place with 4 bolt massive bolts, 2 x 5/8" and 2 x 3/4". Easily installed in a day, and most of that time is just properly relocating the control box solenoid. Designed to used with an Aluminum Hawse Fairlead and Synthetic Rope, providing the best in safety and strength. In stock, and ready to ship.

Continue Reading Add to cart
Schwarttzy
3 In Stock

Super heavy duty rocker panel protection rock slider for the H3 Hummer protect the body right below the doors. Bounce the Hummer off rocks, trees, and whatever happens to get stuck underneath there without worrying about damage. Built to take a beating, the square tubing is a quarter inch thick, the mounts are a half inch thick, the circle tubing is standard DOM roll cage tubing .2 inches thick and they weight in at 84lb. each. Basically, never worry about crushing the rocker panels again.

Continue Reading Add to cart

The H3 Quick n’ Simple Auxiliary Audio Input is back in-stock while supplies last June 11th, 2018! The H3 Quick n’ Simple Auxiliary Audio Input is a plug and play 3.5mm audio input wiring harness for the H3 Hummer factory radio. This wiring harness only minutes to install, works flawlessly, and is easy to use. Once installed, just plug a standard 3.5mm headphone jack in the wiring harness and the other end into your phone. Press the button labeled “Band” on the factory radio until you see “XM”. Do not worry, an XM-Sirus satellite subscription isn’t necessary for the Quick n’ Simple Auxiliary Input. When done listening to the music on the phone, just unplug the 3.5mm headphone jack and XM-Sirus satellite will work normally again.

Guide to the H3 Hummer

Skydiving Camera Mounts

Website Design

Contact Me